Table V specifies the instruction word format, the Derived Address (DA), and the Derived Operand (DO) for each addressing mode that shall be implemented. The smallest addressable memory word is 16 bits: hence, the 16-bit address fields allow direct addressing of 64K (65,536) words. There is no restriction on the location of double word operands in memory.
An addressing mode in which the instruction specified register contains the required operand. (With the exception of this address mode, DA denotes a memory address.)
An addressing mode in which the instruction contains the memory address of the operand.
An addressing mode in which the memory address of the required operand is specified by the sum of the content of an index register and the instruction address field. Registers R1, R2, ..., R15 may be specified for indexing.
An addressing mode in which the instruction specified memory address contains the address of the required operand.
An addressing mode in which the sum of the content of a specified index register and the instruction address field is the address of the address of the required operand. Registers R1, R2, ..., R15 may be specified for pre-indexing.
There shall be two methods of Immediate Long addressing: one which allows indexing and one which does not. The indexable form of immediate addressing is defined in Table V. If the specified index register, RX, is not equal to zero, the content of RX is added to the immediate field to form the required operand; otherwise the immediate field contains the required operand.
An addressing mode in which the required (4-bit) operand is contained within the (16-bit) instruction. There shall be two methods of Immediate Short addressing: one which interprets the content of the immediate field as positive data, and a second which interprets the content of immediate field as negative data.
This addressing mode is used for 16-bit branch instructions. The contents of the instruction counter minus one (i.e., the address of the current instruction) is added to the sign extended 8-bit displacement field of the instruction. The sum points to the memory address to which control may be transferred if a branch is executed. This mode allows addressing within a memory region of 8016 to 7F16 words relative to the address of the current instruction.
An addressing mode in which the content of an instruction specified base register is added to the 8-bit displacement field of the (16-bit) instruction. The displacement field is taken to be a positive number between 0 and 255. The sum points to the memory address of the required operand. This mode allows addressing within a memory region of 256 words beginning at the address pointed to by the base register.